TH2817 LCR Meters
Features:

6 typical test frequencies up to 100 kHz available
Up to 20 meas/sec high speed measurement
Direct, ΔABS and Δ% display modes
Test signal level monitor function
Control settings and setup  parameters protection.
Volume control and Alarm mode setup function.
Brief Introduce:
TH2817 is a high accuracy LCR meter with wide measurement range. TH2817 provides six typical frequencies: 100 Hz, 120 Hz, 1 kHz, 10 kHz, 40 kHz and 100 kHz and three signal voltage levels: 0.1 Vrms, 0.3 Vrms and 1 Vrms. Inductance L, capacitance C and resistance R etc. can be measured. TH2817 with its high performance, strong function and simple operation can be used for high speed measurement in product line and high accuracy measurement in laboratory. The HANDLER, RS-232C interfaces make it easy to build an automatic component test system, and communicate with the computer. Control settings, sorting limits and measurement result values can be printed by the printer interface. So TH2817 gives users a high performance and lost cost LCR meter.
.
Specifications:
Test Parameter
L - D, C - D, R - Q, |Z| - Q, |Z| - D
Test Frequency
100 Hz, 120 Hz, 1 kHz, 10 kHz, 40 kHz, 100 kHz
Test Level
 1.0 Vrms, 0.3 Vrms, 0.1 Vrms
Basic Accuracy
 0.05%
Display Range
|Z|, R    0.0001 Ω — 99.999 MΩ
C         0.0001 pF — 99999 µF
L         0.0001 µH — 9999.9 H
Q, D      0.0001 — 99999
Measuring Speed (meas/sec)
Slow: 1.5, Med: 5.1, Fast: 20
Equivalent Circuit
Series and Parallel
Ranging Mode
Auto and Hold
Trigger Mode
Internal, Manual and External
Averaging Rate
1 to 99
Correction Function
Open and Short ,single and multi frequency Zeroing
Measurement Terminals
5 Terminals
Display Mode
Direct, ΔABS, Δ%, V/I( V/I monitor)
Comparator Function
4 Bins, Volume Control and Alarm Mode setup
Interface
RS-232C, PINTER HANDLER

General Specifications:
Operation Temperature And Humidity 0°C to 40°C, less than 90% RH
Power Requirements 198 V to 242 V AC, 47.5 Hz to 52.5 Hz
Power Consumption less than 20 VA
Dimensions (W×H×D) 350 mm×110 mm×340 mm
Weight 3.8 kg Approx

Ordering Information:
TH2817 LCR Meter

Instrument Accessories:
TH26005 4 terminal test fixture
TH26011 4 terminal Kelvin test clip leads
TH26010 Gilded Shorting plate

Options:
TH26001 4 terminal test fixture
TH26006 Axial component test module (used with TH26005)
TH26007 Core inductor test fixture
TH26008 SMD component test fixture
TH26009 SMD Kelvin test tweezers
TH26004-1 4 terminal Kelvin test clip leads
TH26012 4 terminal Kelvin test clip leads
TH12006 RS-232C control software